| |
TAP GUIDES INSURE THAT THREADS ARE SQUARE TO SURFACE. |
|
The lower portion of the tap guide should remain as square as possible to the engine surface.
Turn the tap slowly while making sure the guide remains flush.
TAP GUIDES
|
| METRIC SIZE |
PART NO. |
| M6x1.0 |
36105 |
| M8x1.25 |
38125 |
| M10x1.0 |
30105 |
| M10x1.25 |
30125 |
| M10x1.5 |
30155 |
| M12x1.25 |
32125 |
| M12x1.5 |
32155 |
| M12x1.75 |
32175 |
| M14x1.5 |
34155 |
| M16x1.5 |
36155 |
| M18x1.5 |
38155 |
| M20x1.5 |
30215 |
| M22x1.5 |
32255 |
| M24x1.5 |
32455 |
|
| INCH SIZE |
PART NO. |
| 1/4-20 |
31420 |
| 1/4-28 |
31420 |
| 5/16-18 |
35168 |
| 5/16-24 |
35168 |
| 3/8-16 |
33816 |
| 3/8-24 |
33824 |
| 7/16-14 |
37164 |
| 7/14-20 |
37162 |
| 1/2-13 |
31213 |
| 1/2-20 |
31225 |
| 3/4-10 |
33415 |
| 3/4-16 |
33416 |
|
 |
Ideal for use in areas where a T handle won't fit. Set of 8 sockets fits all number and fractional M.C.T.I. standard taps thru 1/2". A lso fits 1/8" NPT taps and metric taps thru 12mm manufactured to M.C.T.I. standards. Sockets contained on a vinyl holder.
Time-Sert taps 4mm to 12mm metric / 4-40 to 1/2 inch.
Sockets #1 thru #4 use 1/4 drive,
rest use 3/8 drive.
|
| |
|
 |
The three largest tap sockets, are now packaged in a three piece set. Ideal for use where a T handle won't fit, especially in restricted areas. For larger, fractional M.C.T.I. standard taps. #9 socket is 5/8" (16mm), #10 is for 11/16" (18mm) and #11 is for 3/4". Sockets contained in a vinyl holder.
Time-Sert taps 13mm to 16mm metric / 5/8 to 3/4 inch.
use 1/2 drive socket. |
| |
|
Depress the pocket clip to illuminate. The bright LED bulb lasts up to 100,000 hours. Comes equipped with 2 common replaceable 3 volt batteries, CR2016. Overall length 4 1/2". |
 |
|
 |
2 1/4" diameter mirror swivels to any position. Length extends from 10" to 14". Has an insulated vinyl grip.
|
|
 |
|
Straight Tap Wrench, Length 5 Inches, Hand Taps
Capacity 1/16 to 1/4 Inch, Taps M1.5 to M6
wrench number 00
P/N C67201
|
T- handle wrench, Length 2-3/4 Hand Taps
Capacity 1/16” to 1/4” Inch Taps M1.5 to M6
wrench number T11 P/N C67208
|
Straight Tap Wrench, Length 11 Inches, Hand Taps
Capacity 5/32 to 1/2 Inch, Taps M4 to M12
wrench number 5
P/N C67202
|
T- handle wrench, Length 3-5/8 Hand Taps
Capacity 7/32” to 1/2” Inch Taps M5 to M12
wrench number T12 P/N C67209
Time-Sert taps M5 - M11
|
Straight Tap Wrench, Length 15 Inches, Hand Taps
Capacity 5/32 to 3/4 Inch, Taps M4 to M19
wrench number 6 P/N C67203
|
|
Straight Tap Wrench, Length 19 Inches, Hand Taps
Capacity 1/4 to 1-1/8 Inch, Taps M12 to M28
wrench number 7
P/N C67204
|
|
Straight Tap Wrench, Length 40 Inches, Hand Taps
Capacity 3/4 to 1-5/8 Inch, Taps M19 to M40
wrench number 8 P/N C67205 |
|
Removes broken bolts 5/8 to 7/8.
If removing a Time-Sert insert, this tool will remove
inserts from 1/2 to 9/16 inch or 12mm to 14mm metric. |
Made from hardened tempered alloy steel.
Use when a screw or bolt has broken off while still in the fastening hole. 5 pc set 3/32 to 5/8
If removing a Time-Sert insert, this set will remove inserts from 4-40 to 7/16 inch or 4mm to 11mm metric.
|
| |
Removes broken bolts 7/8 to 1-1/8.
If removing a Time-Sert insert, this tool will remove inserts from 5/8 to 3/4 inch or 16mm to 20mm metric. |
Removes broken bolts 1-1/8 to 1-3/8.
If removing a Time-Sert insert, this tool will remove our 3/4 pipe insert. |
Time Fastener does not sell this tool!
Rotunda Sparkplug Puller Tool.
This tool is used to remove separated or broken spark plug casing on the Ford 3 valve spark plug M16x1.5.
LINK: SPX Spark plug removal tool 303-1203
Link: Read more info. on Ford forums #21 on page
|
|
|
|
TimeSert ® is a registered trademark. No duplication is permitted without the written consent of TIME FASTENER COMPANY. Contents are copyrighted © TIME FASTENER COMPANY 1999 - 2005.