++ TIME-SERT SPARK PLUG Thread Repair System ++ spark plug repair, spit out spark plug, spark plug thread repair, stripped thread in spark plug, spark plug threads stripped, spark plug failure, spark plug defect, sparkplug spit out, spark plug problem, spark plug blow out, sparkplug failure, spark plug stripped, stripped spark plug, spark plug stripped, spark plug thread stripped.

LATEST NEWS


	Name

	E-mail

	Contact Number

	Questions or Comments

TIMESERT® PROFESSIONAL SPARK PLUG THREAD REPAIR KITS AND INSERTS stripped spark plug, stripped sparkplug.

SPARK PLUG THREAD REPAIR KITS spark plug stripped,spark plug threads stripped,stripped.
These kits are considered "Over the fender" meaning you do not have to remove the head.

MEASURING INSERT LENGTH

To measure correctly for the length of insert you need for your application. Measure from under the spark plug (Washer) or (middle of taper for tapered seat) to the last thread. (Not to the end of the electrode). This will give you the correct length. TIME-SERT inserts cannot be shortened. (click here for measurement)


p/n 4412	p/n 4412E

SPARK PLUG TYPES		WASHER SEAT INSERTS copper plated			TAPER SEAT INSERTS silver plated
Installation instructions		LENGTH		PART NO.	LENGTH		PART NO.
KIT SIZE	Part No.	INCHES	METRIC		INCHES	METRIC
M10x1.0 Standard	4010	.360 .600	09.0 mm 15.0 mm	40101 40103	----- -----	----- -----	----- -----
M10x1.0 deep hole kit special instructions	4010E NOTES
KIT SIZE	Part No.	Washer seat inserts			Taper seat inserts
		INCHES	METRIC	PART NO.
M12x1.25	4212	.360 .600 .690	09.0 mm 15.0 mm 17.5 mm	42121 42123 42125	----- -----	----- -----	----- -----
Installation instructions		sparkplug blow out, stripped sparkplug, spark plug threads stripped			spark plug blown out, stripped sparkplugs,sparkplug threads stripped
KIT SIZE	Part No.	Washer seat inserts			Taper seat inserts
		INCHES	METRIC	PART NO.	INCHES	METRIC	PART NO.
M14x1.25 Standard	4412 NOTES:	.270 .320 .370 .430 .530 .600 .660 .905	07.0 mm 08.0 mm 09.4 mm 11.0 mm 13.5 mm 15.0 mm 16.8 mm 23.0 mm	44121 44123 44125 44127 44113 44129 44111 44112	.270 .400 .620 .660 .950	07.0 mm 10.0 mm 15.7 mm 16.8 mm 24.0 mm	44181 44183 44185 44186 44187
M14x1.25 deep hole kit	4412E NOTES:						Sealer required for all taper seat inserts p/n 6020
M14x1.25 Inserts are also available in aluminum click here: normally used in racing applications, where Nitromethane is used as a fuel. Steel inserts typically have a higher tensile strength than aluminum.
Installation instructions		spark plug blowout, stripped spark plug, sparkplug thread stripped			blown out sparkplugs,stripped sparkplug,spark plug thread stripped
KIT SIZE	Part No.	Washer seat inserts			Taper seat inserts
		INCHES	METRIC	PART NO.	INCHES	METRIC	PART NO.
M18x1.5	4815	.400 .720	10.0 mm 18.3 mm	48151 48153	.400	10.0 mm	48181
KIT SIZE	Part No.	Washer seat inserts			Taper seat inserts
		INCHES	METRIC	PART NO.
7/8 - 18	4718	.430 .780 1.000	11.0 mm 20.0 mm 25.4 mm	47181 47183 47185	----- -----	----- -----	----- -----

stripped spark plug thread repair, sparkplug stripped, stripped spark plug thread repair, spark plug stripped.

SPECIAL SEAT CUTTERS For use on some taper seat spark plug repairs that have very limited access to the spark plug hole.		SEAT CUTTER GUIDE M14x1.25 SPARK PLUG For use when the step tap cannot be threaded deep enough through the spark plug hole to allow use of the seat cutter	SEALER FOR HIGH TEMPERATURES This sealer must be used when installing taper seat inserts.	INSERT DRIVER OIL This oil is superior for installing inserts.
KIT SIZE	PART NO.	PART NO.	PART NO.	PART NO.
M14x1.25 Extended Ver	44196 44196E	44195	6020	6010
M18x1.5	48196	spark plug thread repair spark	plug threads stripped	spark plug threads

stripped spark plug, repair stripped spark plug, spark plug thread stripped, sparkplug stripped, repair stripped sparkplug.

•

•

•

•

TimeSert ® is a registered trademark. No duplication is permitted without the written consent of TIME FASTENER COMPANY. Contents are copyrighted © TIME FASTENER COMPANY 1999 - 2005.

site by: CustomWebMedia