QUESTIONS?

	Please use form link below

TIMESERT ® MISCELLANEOUS & SPECIAL KITS

APPLICATION	SIZE	KIT P/N	INSERT P/N
M18x1.5 O2 SENSOR THREAD REPAIR KIT	M18x1.5 kit includes: Reamer, tap, tap guide install driver, 5 inserts 7.5mm stainless.	1815SENSOR Click for larger view	18152NF
APPLICATION	SIZE	KIT P/N	INSERT P/N
Bendix AirCraft Wheel picture section view B737 Honeywell p/n 2606671-2	1/4-28 Special	01488	Time-Sert p/n 014888 ------- 2610546
Bendix AirCraft Wheel Oversized	1/4-28 Oversized use after helicoil pulls out. Must install smaller insert p/n 014888 Inside oversized insert.	01489	Time-sert p/n 014899 -------- 2610547

APPLICATION	SIZE	KIT P/N	INSERT P/N
M10x1.5 30mm FLUSH SURFACE KIT The 30mm length insert requires a special driver with reduced shank.	M10x1.5 kit includes: Drill, counterbore, tap, reduced shank driver, 5 inserts of the 30mm length and tap guide.	1015D30 Click for larger view	10159
APPLICATION	SIZE	KIT P/N	INSERT P/N
Rocker Arm M8x1.25 CORE KIT The core drill included will allow a special 11.7mm length no flange insert to be installed deeper than the standard kit.	M8x1.25 kit includes: Coredrill, , tap, driver, tap guide, 5 inserts of the 11.7mm no flange. The mechanic doing the repair will have to set the counterbore depth manually by hand.	TIME-SERT p/n 1812CORE Click here for: tool information	18125117N
Rocker Arm M8x1.25 BIG-SERT OverSized repair Use after: A helicoil has failed The core drill included will allow a special 11.7mm length BIG-SERT insert to be installed deeper than the standard kit.	M8x1.25 kit includes: Coredrill, , tap, driver, tap guide, 5 inserts of the 11.7mm The mechanic doing the repair will have to set the counterbore depth manually by hand.	BIG-SERT p/n 1812CORE-BS Click here for: tool information	58121
Transmission pan M8x1.25 CORE KIT This kit has a stop collar for FLUSH repair. The kit installs the insert flush to the surface in the limited space of the transmission pan bolt holes.	M8x1.25 kit includes: Coredrill, , tap, driver, tap guide, 5 inserts of the 11.7mm no flange.	1812CORE-FL Click for larger view	18125117N
APPLICATION	SIZE	KIT P/N	INSERT P/N
M8x1.25 CORE KIT Extended 5" inch length tools The core drill included will allow a 16.2mm length insert to be installed deeper than the standard kit.	M8x1.25 kit includes: 5" inch length tools Coredrill, , tap, driver, 5 inserts of the no flange 16.2mm length. The mechanic doing the repair will have to set the counterbore depth manually by hand.	1812ECORE Click for larger view	18125162N
APPLICATION	SIZE	KIT P/N	INSERT P/N
M6x1.0 Extended kit This tooling has no counterbore. The hole must be at least 8mm or .315 inches for the tap to access the hole.	M6x1.0 Extended kit includes: 6" extension drill, 4" tap, 4" driver, 5 inserts of a 17mm length.	1610E2 Click for larger view	16107
APPLICATION	SIZE	KIT P/N	INSERT P/N
DIESEL INJECTOR	M24x2.0	2420	24201
APPLICATION	SIZE	KIT P/N	INSERT P/N
BIG-SERT M10x1.5 OVERSIZED	M10x1.5 Kit includes: Drill, Counterbore, Tap, tap guide, install driver and 5 inserts of the 24.5mm length.	p/n 5015D	50155

•

•

•

•

TimeSert ® is a registered trademark. No duplication is permitted without the written consent of TIME FASTENER COMPANY. Contents are copyrighted © TIME FASTENER COMPANY 1999 - 2011.